METAMORPHOSIS SCHEDULE OF WOODWORK RATES 2013 FOR CHANDIGARH, MOHALI, PANCHKULA



These are my efforts on establishing an free to use repository for the Schedule of labour Rates for civil works locally applicable to the Chandigarh Tricity - ie , Chandigarh, Panchkula, Mohali, Kharar, Zirakpur, Mullanpur.

Feel free to share these with your work mates.

Sr. No. PARTICULARS OF ITEM OF THE WORK Units Column 1 Column 2

CLASSIFICATION OF WOOD
Rs. P. Rs. P.

Column 1 Deodar, Kail, Partal & Commercial Plywood. Column 2 Teak, Assam Wood, Tun, Champ, Imported Wood & Teak Ply & Comm Ply


A-1. Upto 114" thick wooden plain doom, windows including chaukhats upto 3"x 5" & shutters Panelled, Panelled & glazed, battened, wire gauzed or fixed glazing in chaukhats without heeding and moulding (except for fix glazing). Per Sft. 66.25 85.00
2. Upto 114" thick wooden doors and cupboard including chaukhats upto 3" x 5" & shutters with plywood facing with Teak or commercial ply on one side or both side without heeding and moulding. In case of Boxes Shutter no deduction will be made in Chaukhats Rate / Frame Rates. ii 75.00 75.00
3. Upto 114” thick wooden doors and windows including chaukhats upto 3"x 5" & shutters with plywood Panell without heeding and moulding. if 61.25 78.75
4. (i) Upto 114” thick wooden doors and windows including chaukhats upto 3"x5" and shutters with wooden square or rectangular Panell having one side plain and the other side raised without heeding and moulding. ii 93.75 118.75

(ii) Add to item No. A4 (1) for Panell raised on both sides. it 25.00 37.50

(iii) Upto 114” thick wooden doom and windows including chaukhats upto 3"x5" and shutters with square or rectangular Panell having one side plain and the other side raised with plywood including wooden or plywood strips in taper around raised panel without heeding and moulding. it 143.75 150.00

(iv) Add in item No. A-4 (iii) for panel raised on both sides tf 62.50 67.50
5. Upto 114” thick wooden doors and windows upto 3"x5" curved chaukhats or curved shutters horizontal or vertical position frame arched or circular withoutbeeding and moulding. (Total area of the Unit shutter may be square or rectangular) ii 145.00 175.00
5(a) Making and fixing commercial partical or teak board shutters for Cup-board, cabinet, side board, wall units, racks and niches etc. without chaukhat/frame and lipping. Per Sft. 62.50 62.50

(i) AddinitemNo.A5(a)below4sft.areaofshutter. ii 15.00 15.00
5(b) Making & Fixing LCD Unit Finish with Teak ply or laminates with moulding and heeding complete. ti 150.00 150.00
5(c) Making & Fixing LCD Unit curved / round Finish with Teak ply or laminates with moulding and beeding complete. it 200.00 200.00
6. Upto 1 V-z thick wooden doors, windows including chaukhats upto 3"x5" battened shutters Panelling style Panell without beeding and moulding. it 115.00 135.00
7. (i) Extra to item No. A1 to A 5 (a) for Panelling upto 6" wide with plywood strips with joint groove one side. (Whole area of Shutter). ti 45.00 55.00

(ii) Extra 4o item No. A1 toA5 (a) for ornamental Panelling with



plywood strips with joint groove one side. (Whole area of Shutter). ii 70.00 85.00

(iii) Add to item No. A7 (i & ii) above for wooden strips. it 12.0 15.00
8, (i) Add to item No. A1 toA6 above for lap to shutters of any type. It 8.00 10.00

(ii) Add to item No. A1 toA6 above for double leaf. (iii) Add to item No. A1 to A6 in case the part of shutter (rail or stile) ii 20.00 26.00

curved orarched from inside (Total area of shutter) per curved per piece. ii 16.00 23.00

(iv) Add to item No. A1 toA6aboveforslopeordoublepadaminchaukhats. it 12.00 14.00

(v) Add to item No. A1 toA6 for fixing iron handle and tower bolts only. ii 4.00 4.00

(vi) Add to item No. A1 toA6forotherthan iron fitting. ii 5.00 5.00

(vii) Add to item No. A1 toA6 for above in case hard wood chaukhats are used. ii
15.00

(viii) Add to item No. A1 toA6 above for shutters above VA" thick for every %" or part thereof extra thickness. ii 6.00 6.00

(ix) Add to item No. A1 to A6 above for chaukhats above 3" x 5" wide for every 1/4" or part thereof wideness. ii 7.00 9.00

(x) Add to item No. A1 to A6 above for chaukhats above 3" x 5" thick for every Yz or part thereof thickness. ii 6.00 8.00

(xi) Add to item No. A1 toA6 above for fitting of Sliding doors. ii 30.00 30.00

(xi)a. Add to item No. A1 toA6 above for fitting Sliding & Folding if 5.00 5.00

(xii) Add to item No. A2, A19 for fitting of shutters with concealed hinges. ii 4.50 4.50

(xiii) Add to item No. A1 toA6 above for fixing long hinges. ii 2.50 2.50

(xiv) Add to item No. A1 to A6 for pre-laminated partical board used in Panell of doors (on actual consumption) ti 14.00 14.00

(xv) Add to item No. A1 to A6 above for fitting of shutters with overlap including concealed hinges. ti 20.00 20.00

(xvi) (a) Add to item No. A1, A3 to A6 above for Panelled while 4 Nos. to 8 Nos. in one shutter or chaukhat frame. (Panelled, glazed orwireguazed) ii 37.50 45.50

(b) Above 8 Nos. to 12 Nos. in one. ii 45.00 52.50

(c) Above 12 to 16 Nos. in one. M 52.50 62.50

(d) Above 16 Nos. additional charges for each. Each 72.50 82.50

(xvii) Add to item no. A1 to A6 above for making gola or gola gulat on the edge/ corner of chaukhats or shutter with !4" x1/2" (mareed) Per Rft. 11.5 11.50

(xviii)---------------do------------------for round or currved mareed. Per Inch 6.00 6.00
9. (i) Making 1"to11/4"venecian(Jhirmery)inshutterorinchaukhat. Per Sft 135.00 160.00

(ii) Making 1" to 1 Vz movable venecian (Jhirmery) in shutter or in chaukhat. '’ 250.00 300.00
10. (i) Fixing Ready made shutters of any kind without making chaukhats, vision Panell and without fitting and lipping. '’ 25.00 30.00

(ii) Add in Item no. 10(1) For curved/round readymade shutter vertical or horizontal without lipping. Per Sft. 6.00 8.00
11. Upto 1” thick wooden shelves vertical or horizontal on batten or on angle. '’ 37.50 45.00
12. Upto 1" thick commercial or partical board shelves vertical or horizontal without lipping. '’ 30.00 30.00
13. Pre-laminated board used in shelves vertical or horizontal on batten or on angle. '’ 45.00 45.00
14. Making commercial board orwooden cup board, boxes, niches, side board, wall units, racks with plywood back without shutter, border, lipping or moulding upto 12" depth. '’ 90.00 90.00
15. Making niches cup board, boxes, side board, wall units, racks with Prelaminated board with laminated back without shutter, border, lipping or moulding upto 12" depth.
110.00 110.00
16. Add to item No. A14 to A16 for curved / round (All area of unit) '’ 50.00 50.00
17. (i) Add to item No. A14 to A16 above for 12" deep every 3" or part thereof depth. '’ 16.00 16.00

(ii) Add to item No. 14to18forAreabe!ow10Sft. '’ 40.00 40.00
B1 Plywood facing on wall Plain (Panelling) with frame. '’ 45.00 45.00
2 Plywood facing on cealing Panelling with frame. '’ 60.00 60.00
3 Plywood facing on walls with ribs. (Panelling) '’ 75.00 75.00
4 Wooden strips/Plywood Strips 1 Vz to 6" wide facing on walls including base with ribs. '’ 90.00 90.00
5 Pre-laminated board facing on walls & in partition with base, (i) Add in item No. B1 to B4 for ornamental panelling. '’ 67.50 30.00 67.50 30.00

(ii) Add in item No. B3 above for gola and gulat. '’ 30.00 36.00

(iii) Add in item No. A6, B2 and B3 above forornamentaljointgrooves. '’ 18.00 24.00
6 Wooden (plain) facing on walls with frame. '’ 68.00 80.00

(i) Panelling on walls with plywood base with wooden strips upto 2" to 6" wide straight, square or rectangular. '’ 90.00 110.00

(ii) Panelling on walls with plywood base with plywood strips upto 6" wide straight, square or rectangular. '’ 80.00 100.00

(iii) Add in item No. B6 (i) & (ii) above for curved and round Panelling.


7 Fixing Rexine, Velvet, Hessian Cloth, Furniture film etc., including base (without border and moulding). '’ 90.00 90.00
8 Wooden ceiling complete with frame upto 3" wide chapti. '’ 112.00 135.00
9 Ordinary plywood or paper board, Hessian doth on ceiling complete with frame Teak Ply or Readymade tiles, hard board, asbestos sheets. '’ 75.00 75.00

(i) Add to item No. B8 to B9 for ornamental works. '’ 25.00 25.00

(ii) Add in item No. B9 above for raising design on ceiling with wooden strips upto V/z wide. '’ 30.00 30.00
10 Prelaminated Board fixing on ceiling complete with frame. '’ 72.00 72.00
11. (i) Step type ceiling or paragola ceiling upto 6" without deduction of openings. '’ 90.00 90.00

(ii) Add to item B11 (i) above 6" on every 3" or part there of extra height. '’ 15.00 15.00

(iii) Add to item No. B 9 above for curved and round ceiling. '’ 50.00 50.00
12. Wooden flooring with frame and ordinary joints. '’ 90.00 110.00
13. Wooden flooring with Ornamental joints. '’ 130.00 150.00
14. Fixing ready made wooden or plywood floor tiles. '’ 30.00 30.00
15. (i) Fixing Laminate orTeak Plywood pressing / pasting. '’ 40.00 40.00

(ii) Fixing matte impress gold, silver, copper & aluminium. '’ 65.00 65.00

(iii) Fixing furniture film. '’ 20.00 20.00

(iv) Pasting Laminate orTeak plywood on ceiling. '’ 55.00 55.00

(v) Pasting laminated, teak ply, decorative ply pieces. '’ 40.00 40.00

(vi) Add fifty percent extra in the rate of item no. B-15 (i to v) for Pasting Laminate ply in pieces of single colour or different colour in design. '’

16. Fixing aluminium sheet any where else. '’ 35.00 35.00
17. Fixing P VC sheets back side cup board & Almirah. '’ 20.00 20.00
18. Fixing wireguage only on chaukhats on windows with plain wooden pieces or beeding (without making chaukhats) '’ 25.00 25.00
19. Fixing plywood on ready made frame or walls with gatties. '’ 25.00 25.00
20. Fixing wooden or board chaukhats or frame with gatties. '’ 15.00 15.00
21. Making and fixing partition with wooden frame, facing commercial or teak plywood on one side or both sides or panelled, panelled and glazed with beeding or moulding without shutters & joints groove. '’ 48.00 48.00
22. (i) Making and fixing decorative wooden jali upto 1 !4" thick 3" wide square & rectangular holes (without deduction of opening) or on glazing. '’ 80.00 95.00

(ii) ..............do...............do.............with cut and designed member. '’ 110.00 135.00

(iii) ..............do...............do.............pentagon to octagon style hole. '’ 110.00 120.00
23. Making & fixing Jafri on boundary wall or garden partition with chapti straight or cross in frame (Iron poll are installed by the owner at his own cost) '’ 42.00 50.00
C1 (i) Pasting Laminate upto 4" wide and teak ply strip pasting on plywood on walls without base. Per Rft. 18.00 18.00

(ii) Pasting Laminate upto 4" wide and teak ply on cealing without base. '’ 25.00 25.00
2. Fixing plywood on chaukhat or frame upto 4" wide. '’ 12.00 12.00
3. Making and Fixing plain moulding or beeding upto VA" wide for covering joints between chaukhats and piaster and for glass shutter or wiregauze Panell door, edge or corner. '’ 10.00 12.50
4. Making and fixing upto 11A" wide with gola or gola gualt moulding and covering joints between chaukhats and plaster and for glass shutter or wiregauze Panell door, edge or corner. '’ 13.00 17.00
5. Making and fixing upto VA" wide plain moulding or beeding with overlap on Panell of doors, windows, cup boards wiregauze and on glass Panell etc. '’ 11.00 14.00
6. Making and fixing upto VA" wide gola or gulat or gola and gulat moulding or beeding with overlap on Panell of doors, windows, cup boards wiregauze and on glass Panell. '’ 16.00 19.00
7. Add to item No. C3 to C6 above 1 !4" for every %" or part thereof width. '’ 3.00 3.00
8. Making and fixing upto 1%" wide plain curved moulding or beeding without overlap. Per Inch 5.00 7.00

(i) with overlap. '’ 6.00 9.00
9. Making and fixing upto 1 Vi" wide curved, gola &gualt or gola or gualt moulding or beeding without overlap. '’ 7.50 10.00

(i) with overlap '’ 8.00 11.00

(ii) Fixing readty made, plain half round or designing lipping upto 1" wide. Per Rft. 4.00 6.00

(iii) Add: Item No. C-9 (i to iii) every Vi" wide or part thereof. '’ 2.50 2.50
10. Border moulding for niches '’ 18.00 21.00
11. Fixing ready-made plain moulding or beeding without overlap. '’ 7.00 10.00

(i) Fixing readymade Gola Gulat moulding without overlap '’ 11.00 14.00

(ii) Fixing readymade Gola Gulat moulding with overlap. '’ 13.00 17.00
12. Making and fixing plain or half round or designed lipping upto 1" wide. '’ 6.00 10.00

(i) do curved lippinq upto 1 "wide Per Inch 3.00 4.00

(ii) Add for Item No.. 12 (i) and (ii) for every Vz'thicknesss or part thereof. '’ 3.00 4.00
13. (i) Fixing Aluminium sliding channel, single, double, angle, tee and rods. Per Rft. 12.00 12.00

(ii) Fixing Aluminium pipes square or round with filling wooden pieces. '’ 12.00 12.00
14. Making and fixing Straight hand rail plain Gola. up 3"x3" wide. '’ 65.00 80.00
15. Making and fixing Straight ornamental Gola. up 3"x3" wide. '’ 80.00 100.00
16. Making and fixing curved railing without semicircle. (Plain) '’ 150.00 200.00
17. (i) Making and fixing curved ornamental Gola. '’ 200.00 250.00

(ii) Making and fixing curved rope type straight. '’ 200.00 250.00

(iii) Making and fixing curved rope type curved. '’ 300.00 400.00

(iv) Fixing Ready made Railing (Plain) '’ 45.00 55.00

(v) Fixing Ready made Railing (Ornamental) '’ 55.00 75.00

(vi) Add to item No. 1 to 17 (i to iii) above 1" the part thereof '’ 15.00 20.00
18. Making and fixing wooden or commercial board pelmets upto 5" Height (without lipping). '’ 45.00 45.00
19. Making and fixing wooden or commercial board pelmets from 5" to 12” Height (without lipping) '’ 50.00 50.00
20. Making and fixing with teak or ordinary ply facing pelmets upto 5" Height (without lipping) '’ 55.00 55.00
21. do from 5" to 12" Heiqht (without liooinq) '’ 60.00 60.00

(i) Add in item No. C18 to C21 for curved pelmets '’ 40.00 40.00
22. Add to item No. C18 to C 21 above for making ornamental pelmets. '’ 18.00 18.00
23. (i) Add to item No. C18 to C21 above for Panelling with plywood strips. '’ 35.00 35.00

(ii) Add to item No. C18 to C22 above for Panelling with wooden strips.. '’ 40.00 40.00
24. (i) Making and fixing wooden skirting/patti upto 1" thick 4" wide anywhere. '’ 25.00 25.00

(ii) Making and fixing curved wooden skirting/patti 1" thick 4" wide aniwhere. '’ 10.00 10.00

(iii) Add to item No. C24 above 4” additional 2” or part thereof extra width. '’ 5.00 5.00

(iv) Add to item No. C24 A Making Gola on skirting edge. '’ 8.00 8.00
25 Making and fixing cornice with fluting and reading upto 4” wide (any where) '’ 65.00 75.00

(i) Add to item No. C25 for 1" additional part of extra width. '’ 15.00 16.00

(ii) Add to item No. C25 for curved cornice upto 4" width. Per Inch 15.00 15.00

(iii) Fixing readymade cornice Per RFT 20.00 25.00
26. Making and fixing wooden Tee for covering groove upto V* wide. '’ 18.00 25.00
26 a) Fixing steel or metal patti square round orflat in groves '’ 37.00 37.00
27. Making and fixing lining on plywood or laminated surface upto %" wide or thick half round. '’ 18.00 24.00
28. Making and fixing supporting rod (Gaz) on wire gauze shutters. '’ 18.00 20.00

(i) Add in item No. C 28 for making lap or design on gaz,or any where else. '’ 5.00 6.00

(ii) Add for curved supporting Rod (Gaj) Per Rft. 25.00 25.00
29. (i) Fixing Iron, Brass, Auminium pipe or rails in Alimirah or pelmets etc. '’ 15.00 15.00

(ii) Fancy Rod and S.S. Pipe with Bracket any type. '’ 25.00 25.00
30. Making groove 1/8" to 3/4" wide. '’ 6.00 6.00

(i) Making curved grooves 1/8" to 3/4" wide Per Rin 6.00 6.00
31. Fixing of iron bar in chaukhats, Windows, and C window. Per Rft. 6.00 6.00
32. Making of different colour wood in another wood (Finishing) or inlay or metal fixing '’ 25.00 25.00
33. Upto,1!4” zigzag curved moulding. '’ 40.00 50.00
34. Making and fitting corbelling step square or rectangular in decor (Per step) Per Rft. 35.00 35.00

(i) Add item No. C 34 for corbelling steps curved, circular or round (Per step) Per Inch 8.00 8.00
35. Making and fixing wooden square or rectangular pillar upto 6" X 6" Per Rft. 100.00 100.00

(i) Add in item No. C 35 for every 3" or part thereof above 6" pillar. '’ 20.00 20.00
36. Making and fixing wooden pillar circular / round upto 6" X 6". '’ 180.00 180.00

(i) Add item No. C 36 for every 3" or part thereof above 6" X 6" '’ 35.00 35.00

(ii) Facing charges extra on above item's of corbelling & Pillars in Item rate. '’ 30.00 35.00
37. Making and fixing upto 2" wide Gola and Gulat with both side design in tapper. '’ 25.00 30.00
38. Add every Vz " thickness or part thereof. '’ 2.50 3.00
D1 Making and fixing semi circle railing upto 1 ’-6" radius (Plain gola) . Each 450.00 575.00
2. Making and fixing semi circle railing (Ornamental Gola) or rope type. '’ 600.00 750.00
3. Making and fixing semi circle 1 Vz to 3' radius (plain Gola) '’ 400.00 525.00

(i) Making and fixing semi circle 1 Vz to 3' railing radius (ornamental Gola) '’ 600.00 750.00
4. (i) Making and fixing railing straight cut. upto 1 ’-6” (Plain gola) '’ 275.00 350.00

(ii) Making and fixing railing straight cut. upto 1'-6" (Ornamental gola) '’ 350.00 500.00

(iii) Making and fixing pillar in stair upto 4 ft. height '’ 2000.00 2500.00
5. Making and fitting Drawer upto 1' wide in cup board and Almirah etc. '’ 162.00 200.00
6. (i) Making and fitting Drawer above 1’to 3'wide in Almirah and cup board etc. '’ 210.00 275.00

(ii) Making and fitting curved drawer 1 ’ to 3’ wide in any where. '’ 350.00 350.00

(iii) Fixing Drawer rail set. '’ 80.00 80.00
7. Fixing of iron or brass hat pegs on plain wooden block. '’ 12.50 12.50
8. Fixing of iron or brass hat pegs on plain chapti. '’ 16.00 16.00
9. (i) Making and fixing on doors and windows, wooden Gutkas or Rubber block. '’ 15.00 15.00

(ii) Making and fixing on doors and windows, wooden Cleat. '’ 45.00 45.00

(iii) Making and fixing of doors and windows, wooden Ornamental Cleat. '’ 60.00 60.00
10. Making Square hole in chaukhats for iron bars. '’ 12.50 12.50
11. Making round hole in chaukhats for iron bars. '’ 8.00 8.00
12. Fixing holdfast or konies. '’ 6.00 6.00
13. Fixing holdfastwith iron bolt. '’ 15.00 15.00
14. Fixing latch or lock. '’ 420.00 420.00
15. Fixing lock to almirah and drawer etc. '’ 100.00 100.00
16. Fixing double action or single action hinges. '’ 100.00 100.00
17. Fixing door closer. '’ 250.00 250.00

(i) Fixing concealed door closer. '’ 500.00 500.00
18. Fixing iron, brass or aluminium door stopper. '’ 45.00 45.00
19. Fixing door spring. '’ 80.00 80.00
20. Fixing iron sliding bolt to doors. '’ 100.00 100.00
21. Fixing other than iron sliding bolt to doors. '’ 120.00 120.00
22. Fixing of window stays. '’ 25.00 25.00
23. Making and fixing wooden gatties. '’ 15.00 15.00
24. Making arid fixing letter box. '’ 600.00 600.00
25. Making and fixing letter box with name plate. '’ 800.00 800.00
26. Making and fixing permanent ventilator upto 2 Sft square or rectangular. '’ 250.00 250.00
27. Making and fixing permanent ventilator any other shape, upto 2 Sft. '’ 500.00 500.00
28. Making Vision Paneil in shutter rectangular including beeding. '’ 250.00 250.00
29. Making Vision any other shape including beeding. '’ 300.00 300.00
30. Making scarf joint. Each 250.00 250.00
31. Making scarf longitudental joints. '’ 600.00 600.00
32. Fixing night latch/secure door lock. '’ 500.00 500.00
33. Fitting cording set for curtain. '’ 300.00 300.00
34. Cutting hole upto 4” in brick wall. '’ 150.00 150.00
35. 36. Cutting hole upto4" in R.C.C. wall. Add in item No D 34 Rs. 8.00 & D 35 Rs. 15-00 per 1" or part thereof extra wideness. '’ 300.00 320.00
37. Making scribing, comice joint of chaukhats. '’ 40.00 40.00
38. Fixing Hydraulic floor spring. '’ 1100.00 1100.00
39. (i) Covering stair/Jangla pole with ready-made wooden pole. '’ 220.00 250.00

(ii) Covering stair/Jangla pole with plain chapti (Chapti labour extra) (iii) Fixing ready made wooden pole on stair steps or anywhere (bolt fixing by '’ 90.00 90.00

owner at his own cost)
300.00 300.00
40. (i) Fixing magnatic door holder. '’ 70.00 70.00

(ii) Fixing magnatic catcher in cupboard, almirah or anywhere. '’ 25.00 25.00
41. Cutting and fixing exhaust fan template in partical board or plywood. '’ 450.00 450.00
42. Making and fixing corner (Mehraab type or curved step type) upto 1 ft. '’ 180.00 180.00
43. Fixing butt bearing hinges. '’ 60.00 60.00
44. Fixing Light cutting on cealing. Each 100.00 100.00
45. Light switch cutting. Each 75.00 75.00






1.   Add to Col. No. 1 Extra charged 25% if cheel wood used.

(5)  Add to Col. No. 2 Extra charged 25% if Shisham, Sal Kikar, Jaman Brown Velly or eucalytus wood used.

2.    Additional charges for Col. No. 1 Rs 12.00 per Sft. and for Col: No. 2 Rs. 16.00 per Sft. above for bay windows or zig-zag glazing.

3.    The rate and measurement of chaukhats will not be deducted if steel chaukhats are used.

4.    Fixing plain chapti on flat (plain) chaukhats for pattam (rebate) Vi' x 3" wide with scribing cornice Col. No. 1 & 2. Rs. 11.00 per Rft. Charged additional charges 1 “ or part thereof extra width Col. No. i and Col. No. 2 Rs. 2.00 Rft. be charged.

5.    (i) Additional charges in Col. No. 1 Rs. 125.00 Col. No. 2 Rs. 135.00 for making chaukhats or glazing corner cross cut half right angle or other angle shape (Per Piece).

(i)    Curved comer on chaukhat Col. No. 1 Rs. 250.00 Col. No. 300.00 (Per Piece).

(ai)    or Step type Chaukhat will be charged Rs. 140.00 Col. No. 175.00 in Col.    No.    2    per step    the    measurement of the chaukhat will be square or in rectangler and no deduction due to slope or step at corners of the unit 5 (i) & (ii)

6.    Extra rate in for fixing corners in panelled, glazed or wire gauzed shutter inside doorframe shape & design and rate per piece as undercohimn No. 1 & 2.

27.00    27.00    33.00    38.00    45.00    45.00    45.00
33.00    33.00    38.00    45.00    50.00    50.00    50.00

7.    (0 Making Trolley (fixed or moveable) complete with commercial, partical board with face open shutter drawer upto 2 ft. deep face sunmica measuring face area Rs. 600 per sft. extra charges for every 4" deep or part thereof above 2 ft. deep will be charged Rs. 100 per sft. (except ornamental work), (ii) Making Aluminium Trolley complete upto 2' deep measuring face area charged Rs 600 per sft, extra charges for every 4" deep or part thereof above 2' will be charged Rs. 90 per sft. (iii) Extra for curved face of trolley including drawer Rs. 200 per sft. will be charged, (iv) Extra rate for fixing basket in trolly Rs. 225/- per piece will be charged, (v) Add in 7(i) Making & Fixing face area of moduler kitchen with (Extra for Rubber wood, Steam Beach, Teak wood or imported wood) on demand of architect/owner Rs. 2251- Sft. (vi) Fixing
Ready made shutter in kitchen Rs. 120/- Sft.

8.    The above rates of item No. A1 to A6 are only for upto 5" wide stile (frame) or upto 8" wide bottom rail above 5” wide stile & above 8" wide bottom rail extra rate for every 1/2” or part thereof extra wideness will be charged in Col. 1 Rs. 4.00 per sft. Col. No. 2 Rs. 5.00 per sft. (i) in case of gola guiat moulding upto VA" specified in item No. C3 to C9 desired by the owner/architect on extra rate Rs. 5.00 and Rs. 6.00 per Rft. respectively will be charged, (ii) in case of fixed glazing/wiregauzed full rate as per item No. A1 will be charged only deduction of making & fixing beeding/rnoulding will be done from the complete rate.

(i)    Add for curved drawer and curved side rack Niches, 50% extra on item rates.

9. The above rate of item No. A1 to A6 are only for upto T height openable shutter in the same shutter above T height extra rate for every 6“ or part thereof will be charged in Col. No. 1 Rs. 10.00 per sit in CoL No. 2 Rs. 13.00 per sft (i) In the chaukhat members desired by the owner/architect in rounded from inside rate of Rs. 30/- CoL No. 1 Rs. 351- Col. No. 2 per sft wil be charged extra for per curved/round member, (ii) Add to item No. A5 extra rate 25% will be charged in case of chaukhat in curved/roond more than outer one (for per curved/round member).

10.    Dismantling and removing of wooden joinery and other wood work half rate of schedule item will be charged old / removal material used in joinery wiH be charged as per full item rate.

11.    Electririty/Power will be arranged by the owner at his own cost

12.    Above rates are not applicable on foreign catalogue / design book required by owner / architect. Rates wiB be settled by the union or both the parties.

13.    Making and Fixing comenaal board chaukhat wffl be charged wooden chaukhat rates.

14.    For any mistake or misprint in rates or items executive committee will give the clarification.

CONDITIONS

1.    In Case of incomplete work doors and windows cost wl be apportioned as below

0)    Chaukhats Complete - 35%

(ii)    Shutter frame without panefl-30%

(in) Finshing & Fitting panell in shutter frame - 25%

(hr) Fitting & Fixing Shutter Complete in Chaukhats 10%

2.    The above rates do not indude labour for getting wood sawn or purchased

3.    Extra charges for getting wood sawn and purchased will be Rs.1000 per day per head&Rs. 2500/-or out of station.

4.    Thirty percent charges extra on actual labour on non agreement items.

5.    Both sides of chaukhats will be measured in case of double shutters or wire gauzed shutter.

6.    Rate for the non agreement items wiS be decided by the contractor and the owner.

7.    While measuring wood work total length and breadth inducting chaukhat and frame is to be taken.

8.    No deduction is to be made for glass panes or hole if any the labour for fitting of glass panes shall be charged separately

9.    payment shall be made to the contractor fortnightly.

10.    The payment of the contractor's bill shall be made within seven days after the submission of the biB.

11.    Final payment will be made within ten days after the submission of final biB. ff the payment will not be made accordingly the contractor shall be entitled for 18% interest per annum.

12.    If the payment of the contractor’s biU not be made accorcfing to the above mentioned conditions the work can be stopped
without any notice.

14.    All the defects, if any in the work for which the contractor has submitted his bds must be pointed out in writing within
seven days from the date or receipt of the bill otherwise it wiD be treated that the owner has got no objection.

15.    Any correction in the bill may be made in the presence of the contractor. The Hi maker and the bill checker shall be responsible for the correctness of the bill, complete address of bill maker and checker should be given on the bill.

16.    Ten Percent extra win be charged for every additional storey to proceeding storey rates (storey wiH be considered upto 11 ft height).

17.    When room height orthatofwal! (unsupported by intermediate roof) or scaffokfing exceeds 11ft it progressive additional rate 20% for every4ft or part thereofwill be charged for all works above 11 ft height

18.    No item can be withdrawn by the owner after the execution of the agreement without the consent of the contractor in writing.

19.    Contractor will not be responsible for the wood's (Natural) defects such as pinbore/worm warpge, shrinkage, bowing, springing, cupping, twisted, shakes and play in fittings.

20.    Fifteen percent extra will be charged on all the above rates if kilen season wood be used.

21.    All taxes, levies, Duties, Provident Fund, Turnover Taxes, Service Tax & E.SJ. etc. shall be paid by the owner.

22.    Fifteen Percent extra rate will be charged yearly after one year from the date of agreement or commencement of the work whichever is earlier.

No comments:

Post a Comment

Contact Form for MetamorphosisDesign.Org

Name

Email *

Message *